ntxgb
5/11/2007 6:58:07 AM
What is the purpose of the EGR solenoid?
pedro
5/11/2007 1:23:44 PM
Timing - you'll need a timing light. Not sure on the 91 but you may need to jump two connections on the service connector, check the hood for timing and adjustment procedure. There will be two bolts on the distributor to loosen and then turn the dist. until timing marks align. Better get a Haynes manual, cheap reference, $18. If you need to jump wires timing s/b 10 degrees BTDC.
The EGR solenoid turns the EGR off/on depending on idle/cruise/wot. EGR is closed on idle so car won't stall - remember how yours would not idle.
