driving lights

How does one install after market driving lights in the stock location on a 2002 camry xle? do the blanks in the lower bumper cover knock out? what about the wiring, my owners manual tells me that if there are driving lights installed they will come on when the headlights are turned on. Thanks.

i think the blanks do pop out with clips in the back.
and unless you get oem or oem copied lights, you're going to have to custom mount them, and they may look awkward with gaps on the sides etc. most fogs come with wiring instructions and wires.

nodrogkam is absolutely right- the foglamp compartment on the front end should pop out and the make sure you grab the OEM STYLE one so it'll just bolt on. if yours is a gen5 it'll come w/an aux. switch.
 

I have an 05 camry le with no foglights. However there are punchouts i didnt see how id get them out without cutting them out. I just installed mine in the condensor radiator lower air damn and cut out 2 minor sections to make them fit. They look actually pretty good. Greenish car with blue apperance foglights. Ill have to get some pics up

 From my experience with other cars, you might have to remove the bumper cover and take out the fog light covers from behind, not the front.

Yeah- basically i just punched it out with a mallet LOL. I broke a lot of things.. . well from what it sounded like anyways.

The mallet technique is the easiest but, if you don't get oem or copies of them your better off using a different mounting location any way because unless you can find something to fill that space exactly its going to look a little silly.

quote:

ORIGINAL: OnE_To_HatE

nodrogkam is absolutely right- the foglamp compartment on the front end should pop out and the make sure you grab the OEM STYLE one so it'll just bolt on. if yours is a gen5 it'll come w/an aux. switch.

 
they pop out easly