DIY - Do It Yourself Within you will find how-to's on many aspects of modding and caring for your ride as told by your fellow members.

1995 xle low pressure refrigerant port location

Thread Tools
 
Search this Thread
 
  #1  
Old 07-29-2015, 11:09 AM
GPSIS's Avatar
Junior Member
Thread Starter
Join Date: Jul 2015
Posts: 2
Default 1995 xle low pressure refrigerant port location

Hello,

Does anyone have a photo [close up AND expanded view] of the location of the low pressure port used to recharge the freon in a 1995 Toyota Camry XLE?

Apparently the location of the base Camry and the XLE are in different locations.

Regards!
 
  #2  
Old 07-29-2015, 05:25 PM
toyomoho's Avatar
Super Moderator
Join Date: Jan 2008
Location: PTW
Posts: 14,771
Default

Low pressure is located in the passenger/firewall corner of the engine compartment.
 
  #3  
Old 07-30-2015, 09:41 AM
GPSIS's Avatar
Junior Member
Thread Starter
Join Date: Jul 2015
Posts: 2
Default

Originally Posted by toyomoho
Low pressure is located in the passenger/firewall corner of the engine compartment.
Thanks for the speedy reply ToyoMoho!

BTW do you have any photos of the location...I'm not mechanic and this is a first time job for me...something close-up and another from further away would work in order to give me perspective.

Regards!
 
  #4  
Old 07-31-2015, 10:43 PM
toyomoho's Avatar
Super Moderator
Join Date: Jan 2008
Location: PTW
Posts: 14,771
Default

Find the windshield wiper motor, then look down and find the two A/C metal lines. There should be a gray plastic cap exposed on one line. Remove the cap to expose the fitting.
 
  #5  
Old 08-01-2015, 11:26 PM
Patonium's Avatar
Super Moderator
Join Date: Nov 2013
Location: Maine
Posts: 1,449
Default

I recommend using one of those filler cans with pressure gauge. Pop it on there and it is almost idiot proof. If you put it on the wrong line it either won't seal or the pressure will show too high.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
johnbats
New Member Area
4
07-03-2013 04:15 PM
stouto
DIY - Do It Yourself
1
08-05-2011 01:12 PM
a1parrothead
General Tech
5
10-25-2010 11:11 AM
jntskip
DIY - Do It Yourself
2
05-30-2010 08:29 PM
darjevon
General Tech
0
10-12-2006 02:28 AM



Quick Reply: 1995 xle low pressure refrigerant port location



All times are GMT -5. The time now is 06:59 AM.