94 Camry 3sgte turbo
#4
Hey Steve, for the most part, yes it is. My JDM engine was from a ST185 - celica. That being said, the engine block does not have the holes for the rear mount... But being decent @ fabrication, I was able to make an adapter to make it work.
There is a lot of fine details that I learned while doing the install. Hope this answers your question.
There is a lot of fine details that I learned while doing the install. Hope this answers your question.
#8
Thank you, I did the swap at home.
Initially I used the stock tranny and axles. Then one night at the drag stip, the diff gave out.
I had been previously doing research on converting the AWD to FWD. Being mechanically inclined, I learned enough to make me dangerous, & dove into it.
Hadn't dynoed the car to date, but I should be around 250ish...
Initially I used the stock tranny and axles. Then one night at the drag stip, the diff gave out.
I had been previously doing research on converting the AWD to FWD. Being mechanically inclined, I learned enough to make me dangerous, & dove into it.
Hadn't dynoed the car to date, but I should be around 250ish...