Hi All.
#1
Hi All.
I'm a newbie to the forum. I own an earlier "Wide Body" Camry. I have a missing remote problem. Without the remote the car is useless. I've been trying to locate the remote receiver module to work out whether it is genuine or an after market system. I believe it is genuine. Can any one tell me where it should be located?........Phil
#2
system should be factory
which year wide body
depends on location of remote receiver module
remote receiver is in behind the dash
if the receiver has issues
can be re programmed through the diagnostic port
by locksmith with diagnostic scanner
how many buttons does your key remote have... inside the key is a battery
the fob or key
try to source a key from toyota / online or ebay or locksmith
which year wide body
depends on location of remote receiver module
remote receiver is in behind the dash
if the receiver has issues
can be re programmed through the diagnostic port
by locksmith with diagnostic scanner
how many buttons does your key remote have... inside the key is a battery
the fob or key
try to source a key from toyota / online or ebay or locksmith
Last edited by dirty hands; 01-31-2017 at 06:33 PM.
#3
Newbie with remote problem
The car was built here in Australia May '97. It was the last year the wide body was built here. The remote fob only has one button. I have the dash apart but don't know where I should be looking. So far have had no success in finding what I'm looking for.......Phil
#6
only brief mention of fobs page 9 of the glove box owners manual
https://justgivemethedamnmanual.com/1997-toyota-camry/
from a 2009 forum topic read both page one and two
https://www.camryforums.com/forum/di...oor-lock-5149/
To reprogram the FOB requires disconnecting the power mirror plug and jumping some wires.
I myself dont know of any DIY method .. is there anything on youtube ?
I know an odb2 scanner can reset fobs
https://justgivemethedamnmanual.com/1997-toyota-camry/
from a 2009 forum topic read both page one and two
https://www.camryforums.com/forum/di...oor-lock-5149/
To reprogram the FOB requires disconnecting the power mirror plug and jumping some wires.
I myself dont know of any DIY method .. is there anything on youtube ?
I know an odb2 scanner can reset fobs
Last edited by dirty hands; 02-03-2017 at 06:03 AM.