RIMS
Login | |
|
RIMS - 2/7/2006 7:28:58 PM
|
|
|
projectcamry94
Posts: 96
Joined: 1/19/2006 Status: offline
|
I've never looked into putting different rims onto my car.Anyone know what they would have to be as far as offset and stuff? I bought some used ones,they are 16" and they are wrapped in 225/50/16 nitto NT450's,will those fit without spacers? They are universal 5 lug
|
|
|
|
|
|
RE: RIMS - 2/7/2006 9:45:35 PM
|
|
|
jasmtz531
Posts: 146
Joined: 9/3/2005 Status: offline
|
You can fit 225's on a '94?? -Jason
|
|
|
|
RE: RIMS - 2/8/2006 5:39:50 PM
|
|
|
projectcamry94
Posts: 96
Joined: 1/19/2006 Status: offline
|
It's a different rim,it's an aftermarket rim and the tires are on it,i don't know if it will fit,that's why I'm asking
|
|
|
|
RE: RIMS - 2/8/2006 6:25:21 PM
|
|
|
jasmtz531
Posts: 146
Joined: 9/3/2005 Status: offline
|
I dont think a 225 will fit without rolling the fenders. I'd say 205 max. -Jason
|
|
|
|
RE: RIMS - 2/9/2006 4:44:07 PM
|
|
|
projectcamry94
Posts: 96
Joined: 1/19/2006 Status: offline
|
What do you mean by rolling the fenders?
|
|
|
|
RE: RIMS - 2/11/2006 10:43:48 PM
|
|
|
boogz
Posts: 325
Joined: 11/7/2005 Status: offline
|
im not too sure if your 16"s will fit..... but i too am looking to purchase some 18" rims sometime this week, and they happen to be 5 lug universal... so im guessing ==> 5lug universal = fits all 5lug cars no problem?
|
|
|
|
RE: RIMS - 2/14/2006 7:27:35 PM
|
|
|
projectcamry94
Posts: 96
Joined: 1/19/2006 Status: offline
|
As far as bolting up,yes they should fit. With 18's your probabally going to have to get a very very low profile tire to get them to fit.As for mine,I have large 14" tires stock,and with the 2" bigger rim,and 50 size,instead of 70 size,they should fit.What i mean by the sizes are the factory tire size vs the aftermarket size. 195/70/14 were the stock tires, 225/50/16 is the new one,I should get the rims and tires tomorrow.
|
|
|
|
RE: RIMS - 2/15/2006 3:01:57 AM
|
|
|
boogz
Posts: 325
Joined: 11/7/2005 Status: offline
|
i ended up getting the rims i wanted, along with low pro tires as well. so my question is..... anyone know of any good type of lug nuts, cuz the stock lug nuts are too short and i prefer longer ones. So just out of curiosity, what are the type of lug nuts you (question open to everyone w/aftermarket rims) use? any info will be appreciated. im thinking i should just check ebay or something..... but just curious as to what people use. Thanx
|
|
|
|
RE: RIMS - 2/15/2006 4:25:28 PM
|
|
|
jasmtz531
Posts: 146
Joined: 9/3/2005 Status: offline
|
quote:
What do you mean by rolling the fenders? This is a process where the edge of the fender is flared out in a way that will allow a wider tire to fit into the wheel well. You cant rent 'fender rollers' from places, unless you have expierence doing this, I would take it somewhere to be professionally done. I have seen people cut the fender... but I don't recomend this. quote:
i ended up getting the rims i wanted, along with low pro tires as well. so my question is..... anyone know of any good type of lug nuts, cuz the stock lug nuts are too short and i prefer longer ones. So just out of curiosity, what are the type of lug nuts you (question open to everyone w/aftermarket rims) use? any info will be appreciated. im thinking i should just check ebay or something..... but just curious as to what people use. Thanx GReddy and Skunk2 make aftermarket lugs. Not sure if they would fit though. -Jason
|
|
|
|
RE: RIMS - 2/16/2006 2:54:34 AM
|
|
|
trdcamrygracia
Posts: 269
Joined: 5/14/2005 Status: offline
|
i used black racing tuner lug on my solara...its really light weight and looks nice.....but its around 120 to 130 a set.....camrys lug size is 12x1.5
_____________________________
07 BMW 530I Jet black 07 BMW Z4 3.0i Jet black
|
|
|
|
Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Camry Prices
Advertising Info
|
Contact Us |
Advertising |
CamryForums.com Partners |
About Us |
Archive |
Camry Links |
Legal |
Privacy Policy |
© Camry Forums.com
Camry Forums .com is not affiliated with or endorsed by Toyota Motor Sales.
|