Trans problem
Login | |
|
Trans problem - 2/29/2008 4:41:35 PM
|
|
|
Alpha
Posts: 2
Joined: 2/29/2008 Status: offline
|
I have a 96 Camry (4cyl) The car did not move when put in Drive and in reverse. I check the oil, it was kind of brownish It makes a weird noise to, near the starter/ bellhousing
|
|
|
|
|
|
RE: Trans problem - 2/29/2008 6:02:12 PM
|
|
|
toyomoho
Posts: 567
Joined: 1/24/2008 Status: online
|
Determine if the shift arm on the side of the trans is moving in sync with the shift selection console, the cable can break. If OK a few causes could be a bad torque converter clutch or plugged oil intake screen. The pan can be removed to check the screen. Also completely change the fluid (about 6 quarts). Do about 4 drain and refills with a few miles in between to get most of the old oil out, about 2/3rds is always in the converter.
|
|
|
|
Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Camry Prices
Advertising Info
|
Contact Us |
Advertising |
CamryForums.com Partners |
About Us |
Archive |
Camry Links |
Legal |
Privacy Policy |
© Camry Forums.com
Camry Forums .com is not affiliated with or endorsed by Toyota Motor Sales.
|