Twin Exhaust on an aussie Camry

Printable Version

Camry >> Your Ride >> Headers, Intake, & Exhaust >> Twin Exhaust on an aussie Camry

Page: [1] 2   next >   >>

Login Message << Older Topic   Newer Topic >>

Twin Exhaust on an aussie Camry - 6/14/2005 8:49:44 AM    Dan_Lemur   Posts: 35 Joined: 6/7/2005 Status: offline Yeah, just wondering, ive seen a few camrys with the twin exhaust system done and was wondering how i would do it down here in australia. Im just enquiring cause the back bumper i wanna get has the holes for two exhausts and i think if i did the twin exhaust thing down here in aus, i think id be one the first with a twin exhaust camry. any help would be appreciated. Dan_Lemur Post #: 1

RE: Twin Exhaust on an aussie Camry - 6/14/2005 11:45:28 AM    Patrick Posts: 203 Joined: 3/17/2005 Status: offline dan, the way people do it in the states is by welding in a Y pipe towards the rear of the car. unless you can find a kit online, youd need to find a good exhaust shop... (in reply to Dan_Lemur) Post #: 2

RE: Twin Exhaust on an aussie Camry - 6/14/2005 5:38:48 PM    trdcamrygracia Posts: 267 Joined: 5/14/2005 Status: offline any muffler shop can make y pipe for u... _____________________________ 07 BMW 530I Jet black 07 BMW Z4 3.0i Jet black (in reply to Patrick) Post #: 3

RE: Twin Exhaust on an aussie Camry - 6/14/2005 9:11:20 PM    ozzycamry Posts: 22 Joined: 5/14/2005 Status: offline ive seen a lot of camrys with twin pipes down here (australia), mostly v6's, but the odd 4 as well. have a look at www.camcrew.com.au Thumbnail Image Attachment (1) (in reply to trdcamrygracia) Post #: 4

RE: Twin Exhaust on an aussie Camry - 6/15/2005 2:53:06 AM    Dan_Lemur   Posts: 35 Joined: 6/7/2005 Status: offline **** i never even knew that site existed !! thanx for the info ozzycamry (in reply to ozzycamry) Post #: 5

RE: Twin Exhaust on an aussie Camry - 6/15/2005 3:00:50 AM    Dan_Lemur   Posts: 35 Joined: 6/7/2005 Status: offline ALso ozzycamry, do u have to do any real modding to fit the second exhaust in or is it a striaght bolt on? (in reply to Dan_Lemur) Post #: 6

RE: Twin Exhaust on an aussie Camry - 6/15/2005 3:05:41 AM    Dan_Lemur   Posts: 35 Joined: 6/7/2005 Status: offline Lol didnt see any of the other posts, thanx patrick and garcia (in reply to Dan_Lemur) Post #: 7

RE: Twin Exhaust on an aussie Camry - 6/15/2005 9:22:39 AM    ozzycamry Posts: 22 Joined: 5/14/2005 Status: offline is your car a 4cyl or v6? take it to a muffler shop,piss easy not that pricey either, $400 for 2" twin y pipe fitted. the expensive part is the mufflers, they range from $150 up each. (in reply to Dan_Lemur) Post #: 8

RE: Twin Exhaust on an aussie Camry - 6/15/2005 10:09:09 AM    Dan_Lemur   Posts: 35 Joined: 6/7/2005 Status: offline Its a 4cyl, i asked an exhaust shop if they could do one up and they said i'd probably lose a bit of power, but im gonna wait til i get my rear bumper so i can get a better idea of wat i can do. Dan_lemur (in reply to ozzycamry) Post #: 9

RE: Twin Exhaust on an aussie Camry - 6/15/2005 11:34:35 AM    Patrick Posts: 203 Joined: 3/17/2005 Status: offline by adding a Y pipe at the rear of the car it offers VERY LITTLE gain in flow..it is mostly just for look. if you greatly increased the exhaust flow closer to the engine, you may lose some low end torque, but having a y pipe made at the rear of the car, youre likely not goign to notice any difference. (in reply to Dan_Lemur) Post #: 10

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Camry Prices

Top 10 Posters
toyomoho 958 nodrogkam 679 pedro 610 one_to_hate 473 lavalleemike 426 boogz 322 toyoboy 315 trdcamrygrac 267 94camguy 226 black95cam 223