whats goin on

	Camry Forums Classifieds Photo Gallery Member List Search Sponsors
Camry News Forum FAQ Contact Recalls TSBs Timeslips Register Login

whats goin on

Printable Version

Camry >> General Toyota Camry Forums >> New Member Area >> whats goin on

Page: [1]

Message

<< Older Topic Newer Topic >>

whats goin on - 7/8/2007 7:59:46 PM

cajunman1021

Posts: 11
Joined: 6/13/2007
Status: offline

im new to this forum. my names caleb im from louisiana and i drive a 2002 camry le 5 speed. it has some modifications made and most people don't believe its a camry. it is uniqe and fast. but i am having problems with my clutch. i think my slave cylinder is going out. when i run it up to about 5500 it grinds when i try to put it in gear. if i dont run it up it wont grind, but im sure you guys know how it is. does anyone know if there is some kind of upgraded slave cylinder for that car. and if there is where could i find it.

Post #: 1

RE: whats goin on - 7/8/2007 8:52:34 PM

HayWire

Posts: 9
Joined: 6/24/2007
Status: offline

Hello from a fellow Louisianian. If you see a silver 2007 LE 4cyl when driving around, it just might be me... or one of the thousands of other silver 07 Camry owners out there

(in reply to cajunman1021)

Post #: 2

RE: whats goin on - 7/9/2007 9:59:59 AM

Black95Cam

Posts: 223
Joined: 5/20/2007
Status: offline

you can also try to upgrade the disk itself of the whole clutch unit.. which is bit more but it will grab harder and wont slip/grind.

_____________________________

'95 Camry 1MZ FE LE..

(in reply to HayWire)

Post #: 3

RE: whats goin on - 7/10/2007 8:36:44 PM

cajunman1021

Posts: 11
Joined: 6/13/2007
Status: offline

in reply to black95cam, ive already changed the clutch twice. it went out a couple weeks after i got the car, and then i bought one off of ebay and it lasted about three weeks i had 1400 miles on it, but i dont think i broke it in long enough. now i have a toyota clutch. i would like to put a centerforce dual friction, but im not looking foreward to pulling everything down again. i work at a toyota dealership and one of tech's thats been there 9 years said hes 99 percent sure its my slave cylinder. i dont have a problem with it slipping, it just doesnt want to disengage when i run the engine up toward the redline. and it only does it sometimes..

(in reply to Black95Cam)

Post #: 4

RE: whats goin on - 7/10/2007 9:03:37 PM

cajunman1021

Posts: 11
Joined: 6/13/2007
Status: offline

oo and to HayWire my camry is red lowered with exhaust and tinted windows. my car just might stick out a little bit..

(in reply to cajunman1021)

Post #: 5

RE: whats goin on - 7/10/2007 10:19:01 PM

Black95Cam

Posts: 223
Joined: 5/20/2007
Status: offline

i see... did you try TRD and see what they have? aftermarket/performances parts are much harder to find for Camrys.. unless you have resources or just good at looking stuff up...

_____________________________

'95 Camry 1MZ FE LE..

(in reply to cajunman1021)

Post #: 6