Last Updated: 02/03/2015

Warning:

as for all diagnostic/setting tools:
NEVER runs on a laptop NOT fully of battery charge!
NEVER disconnect cable when performing setting!
NEVER CLOSE program while operating!
NEVER RUNS under high power consumption (navi,fans and climate control or light)!
OPERATE with open door and half window(preferably)

The software runs a diagnostic for cable (preferable before starting each action).

All that you need need is a cheaper J2534 TOOL (cheap MINIVCI,ACTIA,KTS,etc).

These are drivers (transparent J2534, cheaper chinese): https://dl.dropboxusercontent.com/u/...LE%202.0.1.msi


Install program (download here https://db.tt/DGxPEExv ) and locate IT3System.ini