Cruise Control
#2
#3
Can also be an open or short circuit in the wiring.
Sensor resistance should be 560-680 ohms.
Connect a voltmeter to the sensor. Obtain a magnet. Position the magnet close to the front of the sensor and pull it rapidly away. The meter should show some voltage being generated.
Might also search the web for possible TSB's for this code.
Sensor resistance should be 560-680 ohms.
Connect a voltmeter to the sensor. Obtain a magnet. Position the magnet close to the front of the sensor and pull it rapidly away. The meter should show some voltage being generated.
Might also search the web for possible TSB's for this code.
Thread
Thread Starter
Forum
Replies
Last Post