2007 Camry TRD V6 dual exhaust on I4
 

Hello everyone,

I have 2007 Camry SE 4 cylinder. I know theyare sellinga single TRD exhaust for 4 cylinder, but I really like dual exhaust setup.
I was thinking about puting TRD V6 dual exhaust on my 4 cylinder Camry. Fitment shouldn't be a problem.
The TRD 4 cylinder exhaust have resonator + muffler a nd the TRD V6 exhaust doesn't have resonator but 2 mufflers.
What I heard there may be a problem with backpressure or something.
What you guys think, is it good idea or just stick with single TRD I4 exhaust?
I do not want have problems, like lossing power, crapy or loud sound, etc.

Thanks

gogo_vs

RE: 2007 Camry TRD V6 dual exhaust on I4
 

The back pressure all depends on themotronic systemwithin the camry...If it is good enough it will be able to detect the lack of back pressure from the increase in the oxygenbeing supplied into thefuel and will adjust its full delivery. However, I have no freaking clue if the camry or any toyota is capable of this... Perhaps someone here could provide the answer. One thing is for sure though, a large portion of people's understanding on backpressure is convoluted and incorrect.

RE: 2007 Camry TRD V6 dual exhaust on I4
 

I'm assuming by "Motronic system" you mean ecu? But, regardless it will run fine after a week or so the computer will acclamate to the new exhaust(My opinion). I would be more concerned with how it would sound. You need to have a point where the exhaust cross in the dual system to equalize the sound from each side.

RE: 2007 Camry TRD V6 dual exhaust on I4
 

Just ordered the exhaust plus the extra parts to add left side muffler.
I found a website, where they selling the TRD V6 exhaust for $660 + $ 22 ship, sounds good to me.

RE: 2007 Camry TRD V6 dual exhaust on I4
 

How fat up are you going with the exhaust?

RE: 2007 Camry TRD V6 dual exhaust on I4
 

Sorry, but I do not understand your question.

RE: 2007 Camry TRD V6 dual exhaust on I4
 

What website??

RE: 2007 Camry TRD V6 dual exhaust on I4
 

http://www.trdsparks.com/displaypart...;parts_id=2360

RE: 2007 Camry TRD V6 dual exhaust on I4
 

let us know how it turns out. and post a video on youtube so we can hear how it sounds...if you have the time

RE: 2007 Camry TRD V6 dual exhaust on I4
 

Yes, i will. I hope there is not going to be big difference in length. I am really wondering how it is going to sound, but if it is designed for V6 which produce more presure, on 4 cylinder it shouldn't be louder.

RE: 2007 Camry TRD V6 dual exhaust on I4
 

Give them a call about the price they have not fixed the error yet.

RE: 2007 Camry TRD V6 dual exhaust on I4
 

what you mean error ? They replied back to me this morning. The will have the exhaust tomorrow morning and shipping out afternoon.

"We have processed your order and we had to order your part from Toyota, it
should arrive here tomorrow morning and ship out that afternoon, email if
you have any questions or need anything."

RE: 2007 Camry TRD V6 dual exhaust on I4
 

How far are you going up with the pipeing? You need to have something where the pipes to the two mufflers cross or this will sound like ****.

RE: 2007 Camry TRD V6 dual exhaust on I4
 

I am going to replace whole exhaust from cat. The TRD exhaust is catback.
Look for pics here:
http://www.toyotanation.com/forum/sh...d.php?t=251531

RE: 2007 Camry TRD V6 dual exhaust on I4
 

Lenght shold be the same. Should install okay as long as the pipeing is the same diamater. Also, just becase it's made for a six and you have a four doesn't mean that it will be quiter on your car than on a v6. i could actually be alot louder. you have to remember the a v6 has headers that are desigend differently than an I4 which only has one header. I'm interested in how this comes up but, as a warning it could be loud as hell!!!

RE: 2007 Camry TRD V6 dual exhaust on I4
 

I am interested also. If it is going to be too loud, I may put the original center resonator back somehow. Do you think this may help ?

RE: 2007 Camry TRD V6 dual exhaust on I4
 

At that price? and how much for shipping?? I asked because there was confusion about pricing and shipping when they first posted online prices.

RE: 2007 Camry TRD V6 dual exhaust on I4
 

Item Subtotal: $660.00
Shipping Cost: $22.22
GRAND TOTAL: $682.22

RE: 2007 Camry TRD V6 dual exhaust on I4
 

The resonator would help a bit but, I would see what it sounds like without it first. You'll know quickly if you like that sound or not often times custom work it hit or miss and you'll know if you miss!

RE: 2007 Camry TRD V6 dual exhaust on I4
 

That is right. Of course I will try it first without the resonator, then I can thing of something else.
Trying to be positive :-)

RE: 2007 Camry TRD V6 dual exhaust on I4
 

motronic = emissions control unit (ECU) same thing, sorry for any confusion

RE: 2007 Camry TRD V6 dual exhaust on I4
 

I'm also got confuse on that! anyway, thanks for clarification. BTW, can you share some of its pics?

RE: 2007 Camry TRD V6 dual exhaust on I4
 

I just received the exhaust today. Tomorrow I should have the extra parts. If I will have a time tomorrow, I will try to put it on.

RE: 2007 Camry TRD V6 dual exhaust on I4
 

I installed the exhaust today. Everything fits perfectly, sound is really great, not that loud but deep. Here in Chicago is raining whole day, so I couldn't make pics, I will try tomorrow

RE: 2007 Camry TRD V6 dual exhaust on I4
 

http://i47.photobucket.com/albums/f1...s/IMG_0035.jpg

http://i47.photobucket.com/albums/f1...s/IMG_0034.jpg

http://i47.photobucket.com/albums/f1...s/IMG_0031.jpg

http://i47.photobucket.com/albums/f1...s/IMG_0057.jpg

http://i47.photobucket.com/albums/f1...s/IMG_0055.jpg


sound clip:

http://s47.photobucket.com/albums/f1...t=MVI_0058.flv

RE: 2007 Camry TRD V6 dual exhaust on I4
 

Did you already have the cutout for the 2nd exhaust tip or did you have to cut it out yourself?

RE: 2007 Camry TRD V6 dual exhaust on I4
 

I did it by myself. I used Dremel.

RE: 2007 Camry TRD V6 dual exhaust on I4
 

How is it going now? How long its been running with the Dremel? I used once and got good result but after few weeks it goes back.

RE: 2007 Camry TRD V6 dual exhaust on I4
 

Everything is fine. It took me about 30 min total to measure a cut the cardboard and make the opening with dremel. What you mean "goes back" ? Dremel is rotary tool, you will cut it off permanently. The cuttingtook me probably just 1-2 minutes.

RE: 2007 Camry TRD V6 dual exhaust on I4
 

that sounds awesome

information to install a dual exhaust on I4
 

Hey, where did you find the information to install a dual trd on an I4? It sounds really good and i want to do it. Also, did you loose any power or gain any power? Thanks.