1996 camery no spark
 

1996 toyota camery 4 cyl no spark changed computer,coil, igniter, timing belt, crank sensor etc. Car drove from the mechanic to home and did not start back. I had some help with checking the system and found. With ignition on no power to the distributor and crank sensor. I don't want to just to change parts i spent losts of money already.

Please helpThanks

Might find a Haynes manual or other source for a wiring diagram. The Autozone website may have a diagram in the sites vehicle repair guide section.

Is the coil and igniter getting power with ign switch on?

Have you checked for blown fuses?

fuses seem to fail...
I checked in autozone but I didn't find a diagram maybe I just over look it or something.

Check fuses is there any specific fuse I should check and where

There is power to the coil and igniter

How about cap, rotor and ign wiring?

Perhaps your library has books by Motor which cover a host of makes and models.

Do an internet search on "1996 Camry no ignition spark" to find posts like the one below:

1996 Toyota Camry Problem Spark/Igt Signal Electrical 4 Cyl Front Wheel Drive

Cap rotor wire is new also, no power to the distributor and crank sensor with ignition on

Where does the distributor and the crank sensor get the voltage from and is it 5 v