Camry Forums - Toyota Camry Forum

Camry Forums - Toyota Camry Forum (https://www.camryforums.com/forum/)
-   New Member Area (https://www.camryforums.com/forum/new-member-area-5/)
-   -   2AZ-FE Exhaust (https://www.camryforums.com/forum/new-member-area-5/2az-fe-exhaust-51607/)

JayBolt 05-09-2017 04:22 PM

2AZ-FE Exhaust
 
So, I have a question as to what to get as far as headers/exhaust manifolds. I was looking at OBX Headers with the down pipe, but I heard that they tend to have a rusting issue from the inside-out after a while. And I was also looking at DC Sports headers but, then again, it's DC Sports. 😕 I don't want to break the bank for headers. If I can stay around the 300-350 dollar range, that'd be awesome. I have a DNA Motorsports SRI with heat shield, new spark plugs, new spark plug boots, new 2.5 inch piping right after the stock cat, resonater deleted, into a GReddy Revolution RS Muffler that's 2.5inch to a 4 inch tip. Any suggestions?

toyomoho 05-10-2017 12:51 PM

Magnaflow sells a header with and with out without the emission converter.

JayBolt 05-10-2017 04:11 PM


Originally Posted by toyomoho (Post 95426)
Magnaflow sells a header with and with out without the emission converter.

I just tried looking for one under magnaflow and they didn't have anything under Camry or the tC. 😕

JayBolt 05-10-2017 04:20 PM


Originally Posted by toyomoho (Post 95426)
Magnaflow sells a header with and with out without the emission converter.

Couldn't I just buy Scion tC race headers and have a Muffler shop bend or form it IF it doesn't fit? I don't see how it wouldn't because it's the same engine. 🤷🏻*♂️

toyomoho 05-11-2017 10:27 AM

What year of car?

Are you going with or without a converter?

Yes, the header flange should bolt up. Will need a custom down pipe to attach the header to the current exhaust.

JayBolt 05-11-2017 06:46 PM


Originally Posted by toyomoho (Post 95432)
What year of car?

Are you going with or without a converter?

Yes, the header flange should bolt up. Will need a custom down pipe to attach the header to the current exhaust.

My car is a 2004 Toyota Camry LE, and I need a converter, unfortunately, because you need one to pass emissions in Pennsylvania. I was looking around at some universal high flow catalytic converters just to replace the stock one.

toyomoho 05-11-2017 08:23 PM

MagnaFlow Header With High Flow Catalytic Converter for 2004 Toyota Camry


All times are GMT -5. The time now is 10:54 PM.


© 2024 MH Sub I, LLC dba Internet Brands