RedPhoenix Here - Check out my 95 Camry
 

Here are some shots of my 1995 Camry LE 2.2

Exterior
Motegi 17" FF7 Gunmetal Rims
Continetal CH95 215/45/17 Tires
Mesh Grill
Clear Corners
Clear Bumper Lights
92-94 Depo Headlight Conversion
Silverstar 9006 Cool Blue
Optx Streetglow Oval Fog Lights 55w H3
Angel Eyes

Interior
Blue Glo-Gauges
Ichibahn Shift Knob
Blue Lighting

Engine
Painted Valve Cover
Painted Heat Shield
Air Intake
K&N Filter (Yes its real :P)
Wire Loom
Extremely Clean Engine bay
Relocated Battery

ICE
Pioneer Premier DEH-P770
Dayton 3/4" Neodyium Tweeters
Seas CA18RNX Mids
Dayton D612D2 Subwoofer
Pioneer Premier 70w RMS Tweeter Amp
Diamond D5300.4 Midrange Amp
Diamond D5600.2 Subwoofer Amp
Stinger 0, 4, 8, 12 AWG Wiring
Stinger RCA Cables
Monster RCA Cables
KnuKonceptz Battery Terminals
Audiopipe Digital ANL Inline Fuse Holder w/ 200amp fuse
Stinger MAXI Digital Distribution Block
Optima Red Top
Custom Ported Box - 35hz 2cu

Suspension and Braking
KYB GR-2 Struts/Shocks
Eibach ProKit Springs

And my Turbo List

Basic Parts
**3S-GTE Exhaust Manifold
**3S-GTE CT-26
Heatshield
5SFE Oil Pan with Fitting Welded In
**Stock Oil Lines
Fittings for Oil Lines
**3S-GTE 2 Bar MAP Sensor
**RX7 460cc Injectors
New Spark Plugs gaped to .030
Custom Downpipe
Intercooler w/ custom piping

Management
SAFC2
MSD BTM
Blitz, HKS, or Greddy BOV
**AEM Wideband O2 Sensor w/ AFR Gauge
Autometer Tranny Temperature
Autometer Boost/VAC

**Marks I have bought


Some pics

http://img.photobucket.com/albums/v4...s/DSC02165.jpg
http://img.photobucket.com/albums/v4...s/DSC02166.jpg
http://img.photobucket.com/albums/v4...s/DSC02169.jpg
http://img.photobucket.com/albums/v4...s/DSC02171.jpg
http://img.photobucket.com/albums/v4...s/DSC02172.jpg
http://img.photobucket.com/albums/v4...s/DSC02174.jpg
http://img.photobucket.com/albums/v4...s/DSC02175.jpg
http://img.photobucket.com/albums/v4...o/DSC02300.jpg
http://img.photobucket.com/albums/v4...o/DSC02304.jpg

RE: RedPhoenix Here - Check out my 95 Camry
 

Very nice... I really wanna see how this turbo install is gonna go. I didnt know a 3SGTE exhaust mani would fit a 5SFE. Good luck with the install. I have a feeling its going to be a pain in the ass. Very nice car by the way.

-Jason

*edit*

How much boost do you plan on running?

RE: RedPhoenix Here - Check out my 95 Camry
 

The actually turbo install is going to take about 2 days. I dont need to stress myself over the install so i will give myself some time. The tuning will be stressful though.

The 3sgte manifold bolts right up, i plan on using my stock 5sfe gasket if its in good condition.

The hardest part of this install will be getting a downpipe made, all custom and very hard.

I plan on stock ct26 boost for now, 6-8psi. Compression test shows 170 across the board for me, so im in decent condition, i just plan on running rich if possible to save myself :).

RE: RedPhoenix Here - Check out my 95 Camry
 

Dont run it too rich. Try to keep it around 11.5:1 Most engines I've seen seem to respond the best in that area. What size downpipe are you going to have made?

-Jason

RE: RedPhoenix Here - Check out my 95 Camry
 

very nice car.....
enough said. [8D]

RE: RedPhoenix Here - Check out my 95 Camry
 

Thanks.

Yeah i know, not too rich. I plan 11 or 12ish. My AEM wideband gauge just came in the mail, woo. I plan on 2.75/3" downpipe, 2.5" exhaust.

RE: RedPhoenix Here - Check out my 95 Camry
 

welcome to camryforum.....nice camry:)

RE: RedPhoenix Here - Check out my 95 Camry
 

Thanks! I think the next bit of stuff im going to get is my gauges, so I can get that installed before I do my turbo install. My SAFC2 and MSD BTM will be around my birthday (2-16)

RE: RedPhoenix Here - Check out my 95 Camry
 

Nice Camry, I like the headlights with angel eyes.

RE: RedPhoenix Here - Check out my 95 Camry
 

thanks.

RE: RedPhoenix Here - Check out my 95 Camry
 

SWEET!

RE: RedPhoenix Here - Check out my 95 Camry
 

Just a little update. I painted my manifold and heat treated it. Got my map sensor all my gasket crap and my aem wideband.

http://img.photobucket.com/albums/v4...emwideband.gif

RE: RedPhoenix Here - Check out my 95 Camry
 

hey RedPhoenix....is ur camry auto or stick.....how many psi do u think auto can handle...thanks

RE: RedPhoenix Here - Check out my 95 Camry
 

I recently sold all of my stuff for my turbo project (94 camry) I didn't feel like messing with tapping into the oil pan/motor,and the downpipe was gonna be difficult,and it was kinda hard finding the mr2 map sensor I'm thinking about starting the project back up though,that means cutting my headers off,they are welded to the exhaust piping

RE: RedPhoenix Here - Check out my 95 Camry
 

Where did you get the headlights?

RE: RedPhoenix Here - Check out my 95 Camry
 

TRD - Its auto. Recently flushed and shows in good condition. I will be adding a large Hayden tranny cooler aswell. Ill be running 6-8psi, whatever the CT26 shows for me. If its 8, ill look into doing the mod to bump it down, but whats good is that, it will be 8 from the turbo, but after the large amount of intercooler piping and the intercooler, probably bump down a psi.

Projectcamry - Well map sensor, i got rather easy, but i see what you mean, because those things are hard to come by. Oil pan is the least of my worries, the downpipes the hardest. A gen3 camry company, TRP (team redline performance) is going to get me a quote on that and an exhaust. The headlights are DEPO and the angel eyes are one of a kind made by me.

RE: RedPhoenix Here - Check out my 95 Camry
 

hey RedPhoenix. i've seen your ride posted on ToyotaNation, I post on there too as Mdogg2199. Keep up the good work