Originally Posted by dirty hands
(Post 94853)
i know bond movies if it was a bond car i would say ejector seat and the roof lifts off |
Originally Posted by toyomoho
(Post 94836)
Camry offered a seat heater.
The wire colors should remain the same at the connectors. White/Black are grounds wires. Green/Yellow is seat belt and airbag sensor. Blue/Orange is 12v from car. Red/Black is seat heater. Any yellow covered wiring is airbag. Any help is appreciated... Darn it for the different Japanese connectors :( |
Yes, I learned this today that the seats i have put into my Japanese 07 Camry Hybrid w/ airbag came from an American 09 Camry Hybrid w/o airbag... I have all the connectors plugged in, there's just one extra wire that's coming from the 09 seat that's only got 2 wires connected to it: one red to black and one black. The red to black one has a fuse connected to it that was tapped into a super thin dark purple wire on both L & R side panel/b pillars (there's like 3 or 4 of them on the drivers side of the 09) and I thought it was a 2nd airbag wire so i read somewhere the airbag wire needs a 5 volt connection to spoof. I found out that a light blue wire on the drivers side of my 07 was pumping 5 volts. Tapped the red and black into that and grounded the black one, started the car and no airbags deployed so that's good. But when I got to the passenger side I tested all the light blue wires and they were over 5 volts, one of them was a ground lmao.
Can anyone explain what this wire connector is for? I first thought it was for the airbag because my airbag light is on, but now I don't think so. https://cimg7.ibsrv.net/gimg/www.cam...27c10d7bab.jpg |
All times are GMT -5. The time now is 05:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands