^^^ I would like that think you..................but I dont get it the stock speakers are like 3" or 3 1/2" what's up with that?

 

i'll try to get that up as soon as possible.. on the newer Camry, not sure what size the speakers you have, but i'll find out tomorrow when i head back to the shop i go through...

 

OK think you FYI I have a 93 V4 ?? I dont know what it is but I dont think it's the LE it dos not have tweeter's

 

yeah all stock door speaker usually dont come with them. but i talked to the guys aat the shop and they said it should be 6 or 61/2.. and dont worry i'll get the pictures up asap..

 

OKthink you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!1

 

no problem.. jsut trying to help out my fellow Camry owner. =D

 

ur right there dude .. mine got cracked while removing it ... but they guy solved it with a kinda glu that made it looks like new

just be carefuls as all the cars i owned b4 never faced a problem like the camry [>:]

all the best

 

yeah i broke a couple of clips here and there but there are still enough left for the panel to stay on without rattling.. i got lucky. and it get really tricky around the door handle too.. came so close to breaking it off...

im out of town right now so i'll get on them pictures once i home...

 

not sure if your door panel is gonna be the same or what not but here i'll go..


http://smg.photobucket.com/albums/v6...cture019-2.jpg
there are 5 screws with 2 clips on the side. with the clips, just push in on the little round park and it'll come out. and 4 of the screws are cover with little caps. use a flat head screw driver and it should come right out. if not work with it a little and it'll come off.

http://smg.photobucket.com/albums/v6...cture020-1.jpg
these are the 2 clips

http://smg.photobucket.com/albums/v6...cture022-1.jpg
remove the caps and phillps styles screws are revial

http://smg.photobucket.com/albums/v6...cture023-1.jpg
the upper one also have a cap sort type thing, use a flat head screw driver and carefully pry around it till it comes out.

http://smg.photobucket.com/albums/v6...cture025-1.jpg
that is the hardest part to remove.. just take some type to pry around and below and slow pull on it till come up.. (if you need, i could try to take pictures of how to do it.. sorry no one was there help me take pictures at the time)

http://smg.photobucket.com/albums/v6...cture027-1.jpg
how it look with it complete remove. (be sure to disconnect the wires)

http://smg.photobucket.com/albums/v6...cture028-2.jpg
kenwood... forgot what model

http://smg.photobucket.com/albums/v6...cture029-3.jpg
stock door speaker bracket..

http://smg.photobucket.com/albums/v6...cture031-2.jpg
to insert the clips.. push the inside of it out and it'll stick out like in the picter. stick it back in and push the middle part in and it'll snap back in place..



couldnt get the pictures to show up. but hope these are some help. if something need to be specify, let me know and i'll do my best to explain it.

 

think you so much I will try to get it done this week O and what size are your speakers?