Write it up and PM {private message} it to Admin or email it to Amanda@CamryForums.com

ANY articles pertaining to our vehicles is welcomed and wanted!!

THANKS!!

~Amanda

 

Amanda,
Can I ask what is up with all the spam posts? They've kind of taken over the forum it looks like.

 

I noticed quite a few post on the stripped threads on headbolts on the camry,s.i have been a mechanic for over 30 years and have also seen this problem,and have came up with a fix.and have customers to back me up on it.i have seen ,and spoke to other mechanics that have done the heli-coil route,most didnt have satisfaction.im in the process of trying for a patent now.i have two driving up and down the road daily with no problems.and its less time consuming,and in my opinion stronger .i keep checking on the vehicles my customers are driving and they just keep thanking me.p.s a lot cheaper also.

 

dont get the email system here

I would like to write up properly this little work

how to remove a 1994 camry 5S- FE 2.2 engine and gearbox .out the top... I did this alone in under a day
manual gearbox and its loom as per repair manual /took me a few hours today and a black eye .
much the same for the 4 cyl and the V6

 

Feel free to do the write up as a new post and I can 'sticky' it. We appreciate new write ups and if this cost you a black eye, I really am curious to hear about it. I always seem to end up bleeding from somewhere when I work on my cars but never a black eye.
Oh, and forget the email system with this site, I'm pretty sure it's dead. I also have no idea who Amanda is but Joey and I here and you can PM us if you need anything.

 

moved to DIY

 

all the motors in one place
will make a good reference material

 

Wow, very nice! Thanks for posting, Dirty Hands!

 

now in the DIY posts

 

Thanks for posting all this great info! I'm sure there are many out there who will frequent this post.