How to test wiring harness to tranny solenoid SL?
#1
How to test wiring harness to tranny solenoid SL?
I've been getting PO770 codes (defective solenoid E), but I'm making slow progress troubleshooting.
Now that I have removed my 1997 toyota camry 2.2l 4 cyl auto tranny's solenoid value SL ("lock up") and it tests OK (12.8 ohms resistance; clicks well on 12V), I need to test the wiring harness.
Unfortunately, I can't figure out where to apply the circuit tester leads to do that test. I am very concerned about NOT damaging the ECM.
Any help on what, where, and/or how to do this test would be appreciated.
Now that I have removed my 1997 toyota camry 2.2l 4 cyl auto tranny's solenoid value SL ("lock up") and it tests OK (12.8 ohms resistance; clicks well on 12V), I need to test the wiring harness.
Unfortunately, I can't figure out where to apply the circuit tester leads to do that test. I am very concerned about NOT damaging the ECM.
Any help on what, where, and/or how to do this test would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post