I am replacing the drivers side cv axle on a 96 Toyota Camry LE V6 and cannot get the 6 8mm hex bolts off. I've tried pb blaster (soaking overnight) and making sure the brake is being pumped or holding the drive itself. They won't budge and I slightly stripped one them in the process. I tried a breaking bar, impact, pb blaster (left overnight). Never had a problem with cv axles before and this one is a nightmare. Any suggestions would be appreciated. I also followed the toyota repair manual but seems to be a little vague and I might be missing something. Thanks!

 

Where are there bolts located, on the trans housing case?