General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

How to reboot the computer after leaving 2 fuses out once

Thread Tools
 
Search this Thread
 
  #11  
Old 01-31-2021, 10:55 AM
sardrum's Avatar
Junior Member
Thread Starter
Join Date: Apr 2020
Posts: 17
Default

I went to the dealer. Engine light - they said they updated the software and that got rid of it! Time will tell. Traction light - they said that comes on with the engine light.

parasitic draw - I had gotten down to 50 milliamps. But I had them look at it further as someone felt it should be more around 20-30. They said the spec is less then 52mA. 30-52mA? The interesting part is that they added two uses that were not in their place since I bought this certified used car? 7.5A/ S-Horn and 20A A/F. They said this brought it down to 49mA. I've had the car for about 6 years without those fuses. And the horn works if that what S-Horn is for?

 
  #12  
Old 02-01-2021, 12:18 AM
toyomoho's Avatar
Super Moderator
Join Date: Jan 2008
Location: PTW
Posts: 14,788
Default

50ma seems to be normal.

S-Horn may be security horn.

Does the car have a 4 or 6 cylinder engine?
 
  #13  
Old 02-02-2021, 08:55 AM
sardrum's Avatar
Junior Member
Thread Starter
Join Date: Apr 2020
Posts: 17
Default

The dashboard lights came back on. The smoke test is next but they want a near empty tank.

4 cylinder. SE model.
 
  #14  
Old 04-01-2021, 08:34 AM
sardrum's Avatar
Junior Member
Thread Starter
Join Date: Apr 2020
Posts: 17
Default

Here's the latest... The smoke test was done. They said after considerable time looking for a leak, they found a very, very small one from the charcoal canister. Base price was $1,400 but could higher as the car has some rust, starting its life in northern climates. Like at least $2,000!!

The engine light only comes on when the car is started, not while its running. Noting this I surmised maybe it's timing thing, where the leak is present at a certain time during start up. I realize it's a stretch... When I start the car, I turn the key and wait until the gas gauge comes up and a chime comes on immediately after that. Then I start it. Now the light rarely comes on. And sometimes I forget to do this. Does anyone know what the logic and timing would be for this?
 
  #15  
Old 04-01-2021, 07:09 PM
toyomoho's Avatar
Super Moderator
Join Date: Jan 2008
Location: PTW
Posts: 14,788
Default

What happens if you just start the engine without waiting?

Have you had the trouble code rechecked to make sure its the same P056 code as before?

Is a Toyota dealer quoting these repair prices?

Is this car required to pass a smog test to get registration tabs?



 
  #16  
Old 04-02-2021, 07:36 AM
sardrum's Avatar
Junior Member
Thread Starter
Join Date: Apr 2020
Posts: 17
Default

The light still comes on whether I delay start or not. It's a matter of how often. It seems to come on much less often when I delay the start.

Same P0456 code

Dealer pricing, yes.

No state inspections. No Smog test.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cblum4135@gmail.com
ECU & Electronics
1
08-21-2020 01:32 PM
Sweploof
ECU & Electronics
0
11-11-2018 10:27 PM
Bio2018cam
TCF Help & Suggestion Center
3
09-21-2018 03:36 PM
Debi Domby
TCF Help & Suggestion Center
6
03-02-2015 12:31 AM
huskerevans
General Tech
2
01-20-2010 08:57 AM



Quick Reply: How to reboot the computer after leaving 2 fuses out once



All times are GMT -5. The time now is 04:39 AM.