2009 camry
Thread Starter
|
Junior Member
Joined: Jul 2023
Posts: 1
2009 camry
Hello all! Please Help..
I have a 2009 Camry V6. I got a check engine light for a p0057 and p0161. I replaced Bank2 Sensor2 and the cleared the codes. I used the car for 4 days going 90 miles round trip each day. Yesterday I was on the highway and the car started to drive rough and the check engine light came back on. Now I’m getting 3 new codes(p0356- ignition coil, p2237-Bank1 Sensor1 ,p2240-Bank2 Sensor1. Any suggestions would be greatly appreciated. Thank you in advance
I have a 2009 Camry V6. I got a check engine light for a p0057 and p0161. I replaced Bank2 Sensor2 and the cleared the codes. I used the car for 4 days going 90 miles round trip each day. Yesterday I was on the highway and the car started to drive rough and the check engine light came back on. Now I’m getting 3 new codes(p0356- ignition coil, p2237-Bank1 Sensor1 ,p2240-Bank2 Sensor1. Any suggestions would be greatly appreciated. Thank you in advance
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
If P0356 ignition coil then start here as this could be the rough running issue!
The sensor codes be because the engine is running rough as in the air fuel ratio is now way off. Fix ign coil issue and determine what happens.
The sensor codes be because the engine is running rough as in the air fuel ratio is now way off. Fix ign coil issue and determine what happens.
Thread
Thread Starter
Forum
Replies
Last Post
