i`m Christian from norway and drives a `93 2.2i wagon. i love my car, but i have to replace the entire suspension system.
it`s just that in norway, these cars are rare and new parts are really expensive.any ideas??[sm=smiley21.gif]

 

The Gen 3 ran from 1992 to 1996. Suspension parts from a Camry Gen 4 (1997-2001) may also fit, plus Gen 1 Avalon (1995-1999) and Lexus ES300 something.

The sedans used pretty much the same suspension parts as the wagon. Any salvage yards having these cars?

Exactly what parts do you need and what do you consider expensive?

Many US after market parts sellers will ship world wide by USPS Express but shipping is not cheap.

 

ok thats useful.i need to change the entire rear suspension and drive shafts in front. i have found a crashed sedan. so im thinking about taking parts from that one. it`s chrashed only on the left side but its condamnd... or what it`s called..hehe. my english is bad. but thanks for the info. it was very useful.

 

These cars either came with a standard V6 or optional V6 and standard 4 cylinder. The V6 may have rear disk brakes but the suspension arms should be the same. If V6 the front disk brakes will be larger in diameter then the 4 cylinder.

The suspension arm should be the same.

In case of the axles the V6 and 4 cylinder use differant trans and thus differant axles. Make sure the crashed car has the same engine.