Audio/Visual Electronics Wired up? Everyone's got some sort of electrical modification. let's hear about it here.

Boyo rear plate backup camera

Old Oct 9, 2011 | 08:01 PM
  #1  
martindt's Avatar
Thread Starter
|
Junior Member
Joined: Jun 2011
Posts: 17
Default Boyo rear plate backup camera

Installed a BOYO VTL375HD HD Rear View Camera and a Boyo VTM600M Rear View Mirror with 6-Inch LCD. I reecoomend the rear plate backup camera, but DO NOT reccomend the rear view mirror. The display is too light.
Install was easy for me was easy drill 5 holes for the rear plate, route the wires thru the trunk and into the passanger compartment, hook up the power and ground.
 
Attached Thumbnails Boyo rear plate backup camera-backup_camera.jpg   Boyo rear plate backup camera-mirror.jpg  

Last edited by martindt; Oct 10, 2011 at 05:47 PM.
Old Oct 17, 2011 | 09:33 PM
  #2  
full house's Avatar
Senior Member
Joined: Sep 2008
Posts: 965
Default

Install was easy for me was easy drill 5 holes for the rear plate, route the wires thru the trunk and into the passanger compartment, hook up the power and ground.
you must be doing that often, I may found myself having hard time installing that
 
Old Oct 18, 2011 | 07:55 PM
  #3  
martindt's Avatar
Thread Starter
|
Junior Member
Joined: Jun 2011
Posts: 17
Default

Naa 1st one, but I do know a lil bit about everything. I'll be installing the display in the sunglass holder.
Change in PLAN, on the location. It's now installed in the drivers side visor. Pictures to follow when I'm finished.
Work in progress. The picture is clear without the mirror.
 
Attached Thumbnails Boyo rear plate backup camera-p1060701.jpg  

Last edited by martindt; Oct 23, 2011 at 10:06 PM. Reason: Update
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NECurve
Audio/Visual Electronics
6
Aug 2, 2010 02:09 AM
cruisin
PRIVATE For Sale / Trade Classifieds
0
Oct 23, 2008 05:48 PM
cruisin
Audio/Visual Electronics
0
Oct 23, 2008 05:26 PM
cruisin
Audio/Visual Electronics
0
Oct 23, 2008 05:23 PM
Image2pixel
Audio/Visual Electronics
0
Jun 27, 2007 05:35 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:21 AM.