Oxygen sensor bank 1 sensor 3
#2
Its on the exhaust pipe behind the converter that's under the car chassis.
Need to get under the car to access sensor. Most likely hardest part.
Need a special sensor socket (available at auto parts stores) and breaker bar or a box wrench.
Disconnect sensor wiring plug.
Unscrew sensor. It could be frozen and need some effort. Here is where the long breaker bar comes in.
Use only special thread lube on new sensor threads hat typically comes with the new sensor.
Tighten to 33 ft-lbs.
Need to get under the car to access sensor. Most likely hardest part.
Need a special sensor socket (available at auto parts stores) and breaker bar or a box wrench.
Disconnect sensor wiring plug.
Unscrew sensor. It could be frozen and need some effort. Here is where the long breaker bar comes in.
Use only special thread lube on new sensor threads hat typically comes with the new sensor.
Tighten to 33 ft-lbs.
Thread
Thread Starter
Forum
Replies
Last Post
Hamster462
General Tech
9
01-05-2023 02:34 PM
Lurch63
Headers, Intake, & Exhaust
1
11-16-2015 01:07 PM