2006 Door Remote Problem
#1
2006 Door Remote Problem
I bought a new remote. Went through 'programming'. The car 'acknowledges both 'add' and 'rewrite' mode. Simultaneously press 'lock' and 'unlock', then 'lock' ... the locks cycle. Open the door, close the door, press 'lock' .... Nothing happens. It seems that the receiver is sensing the remote transmitter, so I'm stumped as to where to spend the next dollar ... does anyone recognize this set of symptoms ?
Thanks,
Alan
Thanks,
Alan
#2
UPDATE: I ran 'Prohibition' mode, which should have erased the record of all fobs, then, I ran 'Confirmation' mode, which should tell me how many fobs are recorded in memory. It appears that Prohibition mode is not erasing the record.
Any thoughts ????
Any thoughts ????
#3
Thanks for the simple and easy to understand instructions!! Got some new fobs for my 04 suburban, and it worked great.
192.168.100.1 192.168.1.1
192.168.100.1 192.168.1.1
Last edited by Alpoi; 05-18-2023 at 03:53 AM.
Thread
Thread Starter
Forum
Replies
Last Post
rosethornil
ECU & Electronics
3
02-07-2008 05:18 AM