Camry Forums - Toyota Camry Forum

ECU & Electronics Discuss electronics and related components within.

98 3.0 injector pulse width way too large. Possible causes?

   
Old Jul 17, 2008 | 06:30 PM
Share
  #1  
98blackcamry's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2008
Posts: 1
Default 98 3.0 injector pulse width way too large. Possible causes?
What would cause the fuel injector pulse width to be too large to start the car? The plugs get fouled before it can even start. The only DTC is p1410. Thanks
-Rob
 
Reply
Old Jul 17, 2008 | 08:14 PM
Share
  #2  
toyomoho's Avatar
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
Default RE: 98 3.0 injector pulse width way too large. Possible causes?
Sorry can't post due to ongoing website issues.
 
Reply
Old Jul 17, 2008 | 08:14 PM
Share
  #3  
toyomoho's Avatar
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
Default RE: 98 3.0 injector pulse width way too large. Possible causes?
All plugs are fouled?
 
Reply
Old Jul 17, 2008 | 08:16 PM
Share
  #4  
toyomoho's Avatar
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
Default RE: 98 3.0 injector pulse width way too large. Possible causes?
The engine may have a mode that increases fuel flow at cold coolant temps.
 
Reply
Old Jul 17, 2008 | 08:16 PM
Share
  #5  
toyomoho's Avatar
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
Default RE: 98 3.0 injector pulse width way too large. Possible causes?
Might make sure the coolant sensor is OK.
 
Reply
Old Jul 17, 2008 | 08:17 PM
Share
  #6  
toyomoho's Avatar
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
Default RE: 98 3.0 injector pulse width way too large. Possible causes?
Check that the fuel pressure regulator is not stuck closed. End of fuel rail.
 
Reply
Old Jul 17, 2008 | 08:18 PM
Share
  #7  
toyomoho's Avatar
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
Default RE: 98 3.0 injector pulse width way too large. Possible causes?
Throttle position sensor bad causing computer to think the throttle is open.
 
Reply
Old Jul 17, 2008 | 08:19 PM
Share
  #8  
toyomoho's Avatar
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
Default RE: 98 3.0 injector pulse width way too large. Possible causes?
Make sure the fuel pump is NOT running when ign key on but engine NOT cranking.
 
Reply
Old Jul 17, 2008 | 08:19 PM
Share
  #9  
toyomoho's Avatar
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
Default RE: 98 3.0 injector pulse width way too large. Possible causes?
Fuel pump should only run when the engine is cranking (or engine running of course).
 
Reply
Old Jul 17, 2008 | 08:20 PM
Share
  #10  
toyomoho's Avatar
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
Default RE: 98 3.0 injector pulse width way too large. Possible causes?
Code may not have been tripped because of engine never running through a test cycle yet.
 
Reply

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 03:19 AM.