General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

98 Camry-V6

Thread Tools
 
Search this Thread
 
  #1  
Old 12-25-2011, 11:28 AM
Jetjock's Avatar
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 1
Default 98 Camry-V6

Hi All, I am a new member and would like to ask about "Lower Control Arm Bushings. What symptoms would I experience if these bushings were worn. Last two oil and filter changes at the Toyota dealership, was told that there is wear with the bushings and need to have new lower control arms. However I am not seeing any uneven front tire wear, or experiencing any significent clunking or adverse any thing. Please advise.
 
  #2  
Old 12-25-2011, 11:45 AM
ukrkoz's Avatar
Senior Member
Join Date: Jun 2010
Posts: 337
Default

how about doing some scouting?

http://www.matthewsvolvosite.com/for...hp?f=9&t=34680

my Silverado has at least one bad, with control arm sitting crooked on one center bolt, and un-alignable pull to the right. as it changes entire suspension geometry. I am next to changing them.
 




All times are GMT -5. The time now is 12:09 AM.