New Member Area New to Toyota Camry Forums? Stop in tell us about you.

Digital Clock went blank

Thread Tools
 
Search this Thread
 
  #1  
Old 06-15-2020, 05:02 AM
Oluwadara's Avatar
Junior Member
Thread Starter
Join Date: Jun 2020
Posts: 4
Default Digital Clock went blank

Hello All,
I drive a Toyota Camry 2003 SE. The Digital clock just went off this morning as i was driving to work. Please what can i do to fix it.

Thank you.
 
  #2  
Old 06-15-2020, 12:41 PM
toyomoho's Avatar
Super Moderator
Join Date: Jan 2008
Location: PTW
Posts: 14,781
Default

Check GAUGE 1, ECU-ACC, DOME, PANEL, IGN, ECU-B fuses.
 
  #3  
Old 06-16-2020, 02:44 AM
Oluwadara's Avatar
Junior Member
Thread Starter
Join Date: Jun 2020
Posts: 4
Default Any thing more to check ?

Thanks very much Toyomoho,

I checked all mentioned fuses, but non seems to be disconnected. All lights on dashboard, inner-lights, every other lights are all working. Only the clock off..
Leaves me clueless.
 
  #4  
Old 06-16-2020, 09:54 PM
toyomoho's Avatar
Super Moderator
Join Date: Jan 2008
Location: PTW
Posts: 14,781
Default

Does the engine run OK?

 
  #5  
Old 06-17-2020, 04:03 AM
Oluwadara's Avatar
Junior Member
Thread Starter
Join Date: Jun 2020
Posts: 4
Default Any thing more to check ?

The engine runs well.
Only that it now runs at high tone this days.
When i start the engine, it picks up at high rpm (over 2) on the dashboard.
I also noticed this morning that the passenger seat belt notification blinks while the clock blanks out.

Leaves me bothered and still clueless.
 
  #6  
Old 06-17-2020, 10:51 PM
toyomoho's Avatar
Super Moderator
Join Date: Jan 2008
Location: PTW
Posts: 14,781
Default

Are you stating the clock numbers work some time but not others?

That the clock now illuminates out of sync with the seat belt light blinking?
 
  #7  
Old 06-18-2020, 06:40 AM
Oluwadara's Avatar
Junior Member
Thread Starter
Join Date: Jun 2020
Posts: 4
Default

The clock does not work at all.

The seat belt light blinks when someone is there and when the seat belt is not knitted to the holder. (this i found out).




 
  #8  
Old 06-19-2020, 04:07 PM
toyomoho's Avatar
Super Moderator
Join Date: Jan 2008
Location: PTW
Posts: 14,781
Default

Can only guess.

The clock and seat belt light appear to share a common chassis ground wiring point. Wonder if the ground is poor resulting in the clocks strange operation.

These are white/black wires that are grounded. Ground location appears under the dash, far drivers side wall at about the same height as the driver side dash vent.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Monica J. Martin
New Member Area
3
05-26-2017 02:03 PM
nfg_dave
New Member Area
3
08-19-2016 10:29 PM
zeeshan
New Member Area
7
05-08-2016 12:47 AM
IP II IIVI IP
New Member Area
4
04-20-2009 01:18 PM
survivor
New Member Area
0
11-06-2006 09:29 PM



Quick Reply: Digital Clock went blank



All times are GMT -5. The time now is 07:59 PM.