New Member Area New to Toyota Camry Forums? Stop in tell us about you.

driving lights

  #1  
Old 05-18-2007, 09:05 AM
Junior Member
Thread Starter
Join Date: May 2007
Posts: 1
Default driving lights

How does one install after market driving lights in the stock location on a 2002 camry xle? do the blanks in the lower bumper cover knock out? what about the wiring, my owners manual tells me that if there are driving lights installed they will come on when the headlights are turned on. Thanks.
 
  #2  
Old 05-18-2007, 10:28 AM
Super Moderator
Join Date: Aug 2006
Location:
Posts: 693
Default RE: driving lights

i think the blanks do pop out with clips in the back.
and unless you get oem or oem copied lights, you're going to have to custom mount them, and they may look awkward with gaps on the sides etc. most fogs come with wiring instructions and wires.
 
  #3  
Old 05-18-2007, 04:57 PM
Senior Member
Join Date: Nov 2005
Location:
Posts: 473
Default RE: driving lights

nodrogkam is absolutely right- the foglamp compartment on the front end should pop out and the make sure you grab the OEM STYLE one so it'll just bolt on. if yours is a gen5 it'll come w/an aux. switch.
 
  #4  
Old 05-18-2007, 10:23 PM
Senior Member
Join Date: Mar 2007
Posts: 222
Default RE: driving lights

I have an 05 camry le with no foglights. However there are punchouts i didnt see how id get them out without cutting them out. I just installed mine in the condensor radiator lower air damn and cut out 2 minor sections to make them fit. They look actually pretty good. Greenish car with blue apperance foglights. Ill have to get some pics up
 
  #5  
Old 05-20-2007, 12:15 AM
Junior Member
Join Date: May 2007
Location:
Posts: 16
Default RE: driving lights

From my experience with other cars, you might have to remove the bumper cover and take out the fog light covers from behind, not the front.
 
  #6  
Old 05-20-2007, 12:51 AM
Senior Member
Join Date: Nov 2005
Location:
Posts: 473
Default RE: driving lights

Yeah- basically i just punched it out with a mallet LOL. I broke a lot of things.. . well from what it sounded like anyways.
 
  #7  
Old 05-21-2007, 08:22 AM
Super Moderator
Join Date: May 2006
Location:
Posts: 438
Default RE: driving lights

The mallet technique is the easiest but, if you don't get oem or copies of them your better off using a different mounting location any way because unless you can find something to fill that space exactly its going to look a little silly.
 
  #8  
Old 05-22-2007, 03:01 AM
Senior Member
Join Date: Mar 2007
Location:
Posts: 183
Default RE: driving lights

ORIGINAL: OnE_To_HatE

nodrogkam is absolutely right- the foglamp compartment on the front end should pop out and the make sure you grab the OEM STYLE one so it'll just bolt on. if yours is a gen5 it'll come w/an aux. switch.
they pop out easly
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
supercoolang
DIY - Do It Yourself
10
09-07-2014 11:54 AM
jetfire
ECU & Electronics
0
07-03-2009 02:34 AM
chocolatemoose
General Tech
3
05-09-2008 07:19 PM
jnason
General Tech
0
01-31-2008 06:39 PM
big6y
Appearance
2
05-22-2007 10:47 PM


Thread Tools
Search this Thread
Quick Reply: driving lights


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.