2003 V6 Camry Sport rear engine mount
#1
2003 V6 Camry Sport rear engine mount
Hi all, I own a 2003 Camry Sport V6 with 5 speed manual transmission.
I have to replace the rear engine mount between the engine and the firewall.
What I need to know is if you can just replace the circular rubber bush without too much hassle.
Or do I need to replace the whole assembly?
I have to replace the rear engine mount between the engine and the firewall.
What I need to know is if you can just replace the circular rubber bush without too much hassle.
Or do I need to replace the whole assembly?
#6
nothing in the repair manuals on how this one is replaced
only shows three bolt on mounts
the location is as if it is pressed into the gearbox housing
if there is no access to the other side of that mount to push it out
at your own risk
I would cut out broken the rubber centre
crush/cut /collapse/the outer steel shell without cracking the aluminium casing
pull that shell out
tap in a replacement bushing in its correct position
only shows three bolt on mounts
the location is as if it is pressed into the gearbox housing
if there is no access to the other side of that mount to push it out
at your own risk
I would cut out broken the rubber centre
crush/cut /collapse/the outer steel shell without cracking the aluminium casing
pull that shell out
tap in a replacement bushing in its correct position
Last edited by dirty hands; 01-30-2016 at 08:30 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Lunareclipse02
Suspension, Brakes, Tires & Wheels
4
09-29-2011 10:09 PM
zcpro
DIY - Do It Yourself
1
05-26-2009 12:10 PM