Radiator clamp size question for 2007 camry se
Thread Starter
|
Junior Member
Joined: Oct 2020
Posts: 3
Radiator clamp size question for 2007 camry se
I'm planning on replacing my upper and lower radiator hoses (with GATES 23153 & GATES 23154) and want to upgrade my clamps to a constant tension T-bolt.
All I can find is that the Gates radiator hoses have a 33mm (1-5/16 inch) inside diameter but nothing is mentioned about their outer diameter.
Could anyone recommend a range for the clamp or a product? I have been seeing Mishimoto Stainless Steel Constant Tension T-Bolt Clamp, 2.5 come up a lot on Amazon but with a 2.48 inches to 2.76 inches clamping range, it seems like it wouldn't fit.
All I can find is that the Gates radiator hoses have a 33mm (1-5/16 inch) inside diameter but nothing is mentioned about their outer diameter.
Could anyone recommend a range for the clamp or a product? I have been seeing Mishimoto Stainless Steel Constant Tension T-Bolt Clamp, 2.5 come up a lot on Amazon but with a 2.48 inches to 2.76 inches clamping range, it seems like it wouldn't fit.
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
Thread
Thread Starter
Forum
Replies
Last Post
