1983 toyota camry le no start
#2
The coil can be replaced.
Determine if you can separate the coil high voltage output lead from the distributor cap. Then check for high voltage (spark) at the coil lead when cranking the engine.
Also check fuses, make sure the coil is getting 12V power.
Determine if you can separate the coil high voltage output lead from the distributor cap. Then check for high voltage (spark) at the coil lead when cranking the engine.
Also check fuses, make sure the coil is getting 12V power.
Thread
Thread Starter
Forum
Replies
Last Post
johnradfx
ECU & Electronics
2
05-02-2010 04:53 PM