Very Interesting Problem, Please help
#11
RE: Very Interesting Problem, Please help
If a manual trans read link below:
http://www.toyotanation.com/forum/showthread.php?t=7841
This was a part problem with the clutch but if the valves are not bent, etc might look further down the engine to the clutch.
Might try having someone press in the clutch when turning the crank by hand.
If you are clever you can align the cam and crank pulley when they are not at TDC and install the belt. The crank turns 2X for every 1X of the cam.
http://www.toyotanation.com/forum/showthread.php?t=7841
This was a part problem with the clutch but if the valves are not bent, etc might look further down the engine to the clutch.
Might try having someone press in the clutch when turning the crank by hand.
If you are clever you can align the cam and crank pulley when they are not at TDC and install the belt. The crank turns 2X for every 1X of the cam.
Thread
Thread Starter
Forum
Replies
Last Post
CamryLastFoureverNever
Suspension, Brakes, Tires & Wheels
4
03-16-2015 07:57 PM
DarkNewEngland
ECU & Electronics
2
07-17-2011 09:47 AM
scott12345
General Tech
4
08-16-2010 07:29 AM
Rayz_Si
General Tech
0
01-07-2007 08:27 PM