General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by:

2012 toyota camry 4-2494 2.5l dohc

Thread Tools
 
Search this Thread
 
  #1  
Old 12-20-2016, 11:58 AM
Kodie Hill's Avatar
Junior Member
Thread Starter
Join Date: Dec 2016
Posts: 1
Default 2012 toyota camry 4-2494 2.5l dohc

eSXsifw.jpg?1
gu4pQY1.jpg?1

Can anyone tell me with literally a 50% certainty what this sensor is? The wire has become disconnected, so I removed the connector already. Hoping this solves the idle/rpm problems I am having.

Relevant information:
Idling at about 600 RPMs
Has to be warmed up or will just rev up and not gain any power When driving, sits at about 2k RPMs unless between 45-55 where it runs at about 1200. This car used to run at 1200 RPMs when doing about 80 and everything else was dead set on 1k.

Thanks in advance, I just couldn't seem to find a diagram for my year range.
 
  #2  
Old 12-22-2016, 11:05 AM
toyomoho's Avatar
Super Moderator
Join Date: Jan 2008
Location: PTW
Posts: 14,779
Default

Camshaft timing control valve.

You need to reconnect the valve wiring.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CamCrazy
Engine & Internal
3
08-08-2016 03:57 PM
scionlife
General Tech
8
01-30-2012 01:33 PM
NorthWet
ECU & Electronics
1
06-08-2007 01:08 AM
ShaolinMonkey
New Member Area
0
05-30-2006 02:17 AM



Quick Reply: 2012 toyota camry 4-2494 2.5l dohc



All times are GMT -5. The time now is 03:31 PM.