97 1mzfe
Thread Starter
|
Junior Member
Joined: Jul 2018
Posts: 1
97 1mzfe
Hi all i stripped my 97 1mzfe for a rebuild and like a numpty didnt mark the inlet cams and was hoping someone has a way of telling the difference between the 2 or a picture of the cams when no.1 is at TDC
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
At TDC for No 1 compression stroke, the cam lobe orientation would be different for the front and back cams.
Install the cam pulleys and orient the pulley cam timing mark up. Then compare.
See private message.
Install the cam pulleys and orient the pulley cam timing mark up. Then compare.
See private message.
Thread
Thread Starter
Forum
Replies
Last Post