General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

No reverse lights, 88 Camry wagon 2.0 auto

Old Apr 1, 2018 | 12:41 PM
  #11  
toyomoho's Avatar
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
Default

Same to you!
 
Old Apr 4, 2018 | 05:02 PM
  #12  
Johnnyrat's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2018
Posts: 11
From: Seattle, WA
Default

The new park/neutral switch arrived today and I got it in. Reverse lights work and car turns over again, as well as the dash gear indicators all work too. Thanks for all the help!
 
Old Apr 5, 2018 | 01:23 PM
  #13  
Johnnyrat's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2018
Posts: 11
From: Seattle, WA
Default

Ok I got the new park/neutral switch installed, it now turns over and reverse lights work, as do all the dash gear indicators. The inside of the old switch looked insanely greased and fouled up.

My new problem is it turns over and only momentarily fires up once or twice, then the battery starts to drain. It started up initially after replacing the switch but immediately stalled out and died when put in gear to test out reverse. It had less than a 1/4 of a tank, and when I checked plugs cyl 1 had crankcase oil all over the top, so I retorqued the four cover bolts as well as put in new plugs (it has new distributor/wires). I put in a few gallons of fresh gas and recharged battery, but it acts like it's not getting enough spark or gas, and it was running REALLY smooth before I started messing with the reverse light problem, and would fire up first time everytime without even touching the gas pedal.

Did I mess something up getting the new park switch in? I've gone over the engine compartment and can't see anything loose, and not sure what next to do until my mechanic can come look at it.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
camry96ss
ECU & Electronics
5
Nov 30, 2011 06:51 PM
artnsf
ECU & Electronics
5
May 24, 2011 01:01 PM
tjsilva
General Tech
7
Nov 3, 2008 12:39 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:05 AM.