does anyone know if 3/4inch wheel spacers fit in the rear of a 09 camry? not adapters, spacers. i just don't know if there would be enough stud left if i were to install these? i wouldn't want to buy them and find out that their wouldn't be enough lug turns for 3/4inch spacers. please let me know. thank you.

 

You can find out, place enough washers or other material between the tire and hub/drum to move the tire out 3/4 inch. Then attempt to install the lug nuts.

You might be able to get longer studs, the should be pretty standard sizes.

 

ok. well if that's the case, i might as well buy the wheel spacers and try them. better that buying a bunch of washers that i wouldn't need after this simple project. thank you

 

You can use any spacer that is 3/4 of an inch even small blocks of wood. You are only checking exposed thread length not istalling the lug nut to drive the car.