alarm not working
#2
Guessing disconnecting power from the alarm system requires it to be reset.
Is the a factory or dealer installed alarm system or something the owner had installed themselves?
If dealer or factory the reset method may be in the owners manual.
Is the a factory or dealer installed alarm system or something the owner had installed themselves?
If dealer or factory the reset method may be in the owners manual.
#4
If you have some kind of aftermarket alarm try the following:
Look under the dash for a button or switch. If there is one try the following:
Turn ign key on to the position before engine crank. Within 5 seconds press and hold in the override button until the LED (the blinking light) in your dash area goes solid and the siren chirps once.
If there is a toggle switch instead of button repeat the process but turn the switch in opposite direction then turn ignition switch off.
Look under the dash for a button or switch. If there is one try the following:
Turn ign key on to the position before engine crank. Within 5 seconds press and hold in the override button until the LED (the blinking light) in your dash area goes solid and the siren chirps once.
If there is a toggle switch instead of button repeat the process but turn the switch in opposite direction then turn ignition switch off.
Thread
Thread Starter
Forum
Replies
Last Post
moh.vze.com
General Tech
1
01-31-2008 02:49 PM