selecting front rotors....
#2
Brembo makes good rotors at reasonable prices.
Suggest you stick with a standard style. The rotors should already be "vented" by design having an air gap between the disk surfaces.
Drilled rotors can crack at the holes, slotted rotors can chew up the pads. Neither is required for street driving.
Suggest Toyota brand pads as less tendency to make noise. Reuse any shims that are installed between the pad and caliper, use a little brake grease on pad/caliper contact area minimize risk of noise (squeal).
Suggest you stick with a standard style. The rotors should already be "vented" by design having an air gap between the disk surfaces.
Drilled rotors can crack at the holes, slotted rotors can chew up the pads. Neither is required for street driving.
Suggest Toyota brand pads as less tendency to make noise. Reuse any shims that are installed between the pad and caliper, use a little brake grease on pad/caliper contact area minimize risk of noise (squeal).
Thread
Thread Starter
Forum
Replies
Last Post
h.cardle4
Engine & Internal
3
10-21-2013 10:56 PM
h.cardle4
DIY - Do It Yourself
3
10-21-2013 10:37 PM
h.cardle4
General Tech
0
10-19-2013 08:51 PM
Paul3637
General Tech
10
04-09-2009 10:09 AM