1993 Camry won't start
#1
1993 Camry won't start
So, I "did-it-myself" and replaced a head gasket on my 1993 Camry.
It was running fine, just leaking a little oil into the coolant.
I cleaned everything and put it back together.
Now it won't start. It sounds like it is spinning VERY freely. Its not a normal cranking sound, its more like a whirring. I am getting spark (at least to #4) and there is gas coming from injector 4 (when I pulled it out).
I think it must be something easy but haven't found any loose connectors or missing vacuum lines.
Is there something special to do following a battery disconnection before the car will start?
Thanks in advance.
Redtree
It was running fine, just leaking a little oil into the coolant.
I cleaned everything and put it back together.
Now it won't start. It sounds like it is spinning VERY freely. Its not a normal cranking sound, its more like a whirring. I am getting spark (at least to #4) and there is gas coming from injector 4 (when I pulled it out).
I think it must be something easy but haven't found any loose connectors or missing vacuum lines.
Is there something special to do following a battery disconnection before the car will start?
Thanks in advance.
Redtree
Thread
Thread Starter
Forum
Replies
Last Post
jungling
New Member Area
3
09-20-2011 09:07 PM
Camryfam1993
Engine & Internal
3
08-09-2011 11:21 AM
luberack
General Tech
1
03-03-2011 09:09 PM