Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Cooling System Guides
- Toyota Camry: How to Stop Radiator Coolant Leak
Step by step instructions for do-it-yourself repairs.
Browse all: Cooling System Guides
coolant leak in my 4cyl 02 Camry
#1
coolant leak in my 4cyl 02 Camry
leak is at the back of engine, through foam, under plastic intake manifold. turns out in my case that its stripped threads in the block, not just a mere head gasket. been doing some research, Im gonna go with time serts in the block 11m x 1.5. I am pissed cause I looked after my black Camry, never a late service,always at my local (reputabal) dealer. only 160k on it!. shoulda got 4 to 500k.
I suspect that other owners will encounter this thread failure, as it seems to have held on for several years!. If your an 01 to 04 owner beware of this problem, in an otherwise reliable well looked after car. Toyota just gave me a huge kick in the wallet!.
you need 12mm 12 point long male torx socket to R/R head bolts. other special tools are 11mx1.5 time sert kit.(apparently not enough room by water jackets for heli coils.)
I suspect that other owners will encounter this thread failure, as it seems to have held on for several years!. If your an 01 to 04 owner beware of this problem, in an otherwise reliable well looked after car. Toyota just gave me a huge kick in the wallet!.
you need 12mm 12 point long male torx socket to R/R head bolts. other special tools are 11mx1.5 time sert kit.(apparently not enough room by water jackets for heli coils.)
#7
The Time-Sert installation should be able to use the old bolts. If not look for head "studs" for same engine model perhaps like in link below:
ARP Head Stud Kit - Scion TC 05-06 2AZFE
ARP Head Stud Kit - Scion TC 05-06 2AZFE
#8
when installing time sert it will be set in top of block flush with surface of block and my bolts have no threads at that point threads are at bottom portion of original head bolt will studs from arp going to be of proper length to hit sert and head
#9
The insert should be set at the same depth as the old threads to allow using OEM bolt.
++ TIME-SERT Head bolt thread repair ++ Head bolt stripped. Stripped head bolt threads, repair stripped headbolt threads, stripped head bolt threads, stripped sparkplug threads head bolt threads stripped stripped head bolts.
++ TIME-SERT Head bolt thread repair ++ Head bolt stripped. Stripped head bolt threads, repair stripped headbolt threads, stripped head bolt threads, stripped sparkplug threads head bolt threads stripped stripped head bolts.
Thread
Thread Starter
Forum
Replies
Last Post