2.2 runs somewhat irregularly while driving
Thread Starter
|
Junior Member
Joined: Sep 2017
Posts: 13
From: Swifterbant in the Netherlands
Joey, I placed another wire on coil nr 3 but it makes no difference.
there are no leaks or other strange things so far as I can see
12v wiring looks alright, but are there some points on this wiring that I can check wiht a multimeter (ohms/volts)?
Regards; Rob
there are no leaks or other strange things so far as I can see
12v wiring looks alright, but are there some points on this wiring that I can check wiht a multimeter (ohms/volts)?
Regards; Rob
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
Spark plug wires should have a resistance of 25K ohms of less.
Coils resistance between primary (ign wire plugs)
Cold 9.7-16.7 kohm. Hot 12.4– 19.6 kohm.
Black/Red wire should be battery voltage ign on.
Brown is ground.
The other wires go to the computer.
Camshaft position sensor Cold 835–1400 ohm. Hot 1060–1645 ohm
Crankshaft Cold 985–1600 ohm Hot 1265–1890 ohm
Is the No 3 plug electrode darker/lighter then the other plugs?
Coils resistance between primary (ign wire plugs)
Cold 9.7-16.7 kohm. Hot 12.4– 19.6 kohm.
Black/Red wire should be battery voltage ign on.
Brown is ground.
The other wires go to the computer.
Camshaft position sensor Cold 835–1400 ohm. Hot 1060–1645 ohm
Crankshaft Cold 985–1600 ohm Hot 1265–1890 ohm
Is the No 3 plug electrode darker/lighter then the other plugs?
Thread
Thread Starter
Forum
Replies
Last Post
Dill
Engine & Internal
8
Sep 8, 2017 05:46 PM
