1990 camry brake fitting question
Thread Starter
|
Junior Member
Joined: Jan 2016
Posts: 6
From: Wisconsin
1990 camry brake fitting question
Hi. I am replacing some brake lines and noticed the "3/8-24 Inverted Flare Gold Zinc Tube Nut Fitting 3/16 Brake Line" fittings I ordered are not as long as the original ones and do not have a taper at the end of the threads(see pic).
The new ones are only 10 mm long and old ones are 15 mm. They bottom out before sealing the inside end of the joint. Anyone know where to find the 15 mm with the tapered end?
I found solution. This is it: BR170 3/8"-24 Bubble Flare Nut.......
The new ones are only 10 mm long and old ones are 15 mm. They bottom out before sealing the inside end of the joint. Anyone know where to find the 15 mm with the tapered end?
I found solution. This is it: BR170 3/8"-24 Bubble Flare Nut.......
Last edited by ceramicbrad; Jul 21, 2017 at 06:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post
sithunderbird
Suspension, Brakes, Tires & Wheels
1
Mar 13, 2008 04:40 AM
