I'm in need of some help here.

I have a 2009 Camry Hybrid, I just took off all 4 of the door cards, and when I installed them when I attempted to lock the door from the inside door locks. The car unlocks and unlocks the door again and again and then locks the car again. I checked all the connections and they looks good. Has anyone ever run into this?

Link to my two videos of my issue.
https://drive.google.com/drive/folde..._j?usp=sharing

Thanks for the help.
Michael

 

Suspect a door locking cable or rod is sticking or a door closed/open electrical switch. You lock the door which moves the locking mechanism but the cable or rod sticking prevents the lock from fully locking and completing the process so it kicks back.

A sticking door switch will cause the locking computer to "think" the door is still open and not complete the locking cycle.

 

your are right, it was the white cable on top and the green cable on the bottom for the door latch. They all need to be set up that way, or you will get the lock unlock issue.

Thank you sir.