ac works when it pleases (apparently)
Thread Starter
|
Junior Member
Joined: Jun 2015
Posts: 19
Bumping thread from almost a year ago, today the ac compressor finally failed again, couldn't find a relay for it but just a 10amp fuse, removed fuse to check it, wasn't blown but when I put it back in the compressor started spinning again, I'm hoping just corrosion on the terminal is the culprit
Super Moderator
Joined: Jan 2008
Posts: 15,179
From: PTW
The magnetic clutch relay is in a relay box, engine compartment drivers side.
The A/C system has various components such as max/min pressure sensors, amplifier, speed sensor, etc. Its possible the system reset and the problem will occur again.
Have you checked high/low pressures when A/C is operating with a gauge set?
The A/C system has various components such as max/min pressure sensors, amplifier, speed sensor, etc. Its possible the system reset and the problem will occur again.
Have you checked high/low pressures when A/C is operating with a gauge set?
Thread Starter
|
Junior Member
Joined: Jun 2015
Posts: 19
The magnetic clutch relay is in a relay box, engine compartment drivers side.
The A/C system has various components such as max/min pressure sensors, amplifier, speed sensor, etc. Its possible the system reset and the problem will occur again.
Have you checked high/low pressures when A/C is operating with a gauge set?
The A/C system has various components such as max/min pressure sensors, amplifier, speed sensor, etc. Its possible the system reset and the problem will occur again.
Have you checked high/low pressures when A/C is operating with a gauge set?
Thread
Thread Starter
Forum
Replies
Last Post
offchops
ECU & Electronics
5
Feb 19, 2009 11:44 AM
Toysrme
Headers, Intake, & Exhaust
0
Feb 19, 2006 12:09 AM
